FCP68** Werewolf Face - 2 Piece Latex - Complete Kit
You may become a wolf when the wolf bane blooms and the autumn moon is bright.
The complete Werewolf kit includes:
the werewolf face, latex two piece prosthetic(nose and teeth)
brown fx hair
wolf brown and black cream makeup
detailed, easy to use instructions.
Werewolf Ears or Ear Tips and Liquid Latex can be purchased separately. I have included links below.
Step I - Always start your makeup with a clean, dry face. If you need moisturizer under the makeup, make sure it is water-based type, as it will be absorbed in the skin faster and will not leave an oily coating on the face. If applying makeup to several people we recommend scooping a small amount of makeup out and putting it on a palette, this will help prevent the spread of germs.
Step 2 - Hold both the upper and lower appliance pieces in place against the face to determine the proper placement. Although most of the appliances can be worn on several size faces, take the time to check the size of the piece with the area desired for application. You may prefer to trim some excess edges before applying some appliances. When trimming edges, try to leave at least 1/4” around the base at the appliance. The lower fangs should fit well into snarl-raised area at upper lip.
Step 3 - On clean skin, brush or swab, Spirit Gum to the face. Take care not to apply in an area larger than base at the appliance. Taking your index finger or Makeup Sponge, tack the surface with a light up and down motion. This helps to increase the adhesion of the Spirit Gum.
Step 4 - Place the bottom appliance over the adhesive and press into place. Powder any exposed areas of spirit gum. Repeat steps3 & 4 for the upper piece.
Step 5 - For a more professional look, the edges to the appliance may be stippled with a thin layer of Liquid Latex, using a Makeup Sponge or Black Stipple Sponge. Allow the latex to dry before applying a second coat. Remember that two thin coats will dry faster than one thick coat. You may use a hair dryer to speed up drying time. Powder the dry latex when finished. Dust off excess powder.
Step 6 - Makeup or Rubber Mask Grease Makeup may now be added. Using a section of a makeup sponge, pat on the wolf brown makeup sparingly. When using a regular cream-based makeup, you may want to first sponge on a thin layer of Castor Sealer to seal the latex. This will prevent the Makeup from lighting up over time. The addition of highlights and shadows should then be applied over base coat. This is achieved by applying lighter and darker makeup colors. The Makeup should be set with Colorless Powder to prevent it from rubbing off.
Step 7 - When applying FX Hair, remember to start from the neck and outer areas of the face (forehead, jaw line, and below the chin areas). Working towards the center of the face, apply in rows or layers:
(A).Starting below the chin, apply a thin coat of Spirit Gum. Tack it down with a makeup sponge.
(B).Carefully place hair onto treated surface and tack sections into place with your finger.
Repeat steps (A) & (B), along jaw line, cheekbone, and below lower appliance.
Repeat steps (A) & (B) on upper forehead, along the temples, and above eyebrows. Proceed until achieving desired effect. Remember, it is easier to add more, than to take some off.
Hair may be added to the hands and other parts of the body as desired. Follow the same steps above. This works great by ripping old clothes, adding hair, and putting FX Blood around the hole.
Step 8 (optional) - If you purchased Wolf Ear Tips, and/or finger tips, they can be added following the same steps described above.
Note: If you use your fingers to apply makeup, the oils in your fingers will work to break down the makeup. The makeup will not last as long or provide a smooth even coverage.